Rattlesnake Cable Company - High Quality Instrument Cables - Made in Montana

  Electrical Guitar Company (EGC) neck on Ephiphone Wilshire

Return to forum index

 Author  Message
PostPosted: 11/09/2011 at 1:03 PM    Post subject: Electrical Guitar Company (EGC) neck on Ephiphone Wilshire

Electrical Guitar Company (EGC) neck on Ephiphone Wilshire body. Auction is a 7 day listing, with reserve. Current bid at the time of this post is $305.00

Description: "Finally parting with my EGC guitar. I ve listed it before but took it down because I just kept wanting to play it! This is a conversion from an old Wilshire I had that was fitted with a floyd rose. EGC Dug out all that crap and put in one of their fantastic setups in it. This is the larger profile neck, which is more akin to a modern les paul. Most egcs come with verrrryy slim necks. It has two single coil EGC pickups in it The pickguard is a repro. The guitar has seen alot of use but the frets have little to no wear. There is some streaking on the upper parts of the fretboard, I don t have any idea how to clean or polish the guitars but Kevin from EGC (electricalguitarcompany.com) Can probably help you with that if you care to work out how to clean it. The body has 4 small drill holes from the original epiphone trem. The knobs are beat but pots are original wilshire pots and so is the switch. No buzzing or anything. That s pretty much all I know, but feel free to message me if you have any further questions. PLEASE message me if you are bidding international before placing bid, thanks! Good luck"



Back to top


Disclosure: Any links to eBay or Amazon.com are affiliate links. Affiliate links may provide commission payments to the site based on purchases.

Holiday Gift Ideas at GuitarCenter.com Massive Selection of Guitars Online Guitar Center

  Return to forum index

Home  |   About  |   Bastin  |  Bergeron  |  Electrical  |  Kramer  |  Obstructures  |  Travis Bean  |  Vaccaro  |  Veleno®  |   Forum  |   Contact  |   Privacy Policy
© 2024 MetalNecks.com