Rattlesnake Cable Company - High Quality Instrument Cables - Made in Montana

  Kramer Artist 650G

Return to forum index

 Author  Message
johnny
PostPosted: 09/22/2009 at 09:56 AM    Post subject: Kramer Artist 650G

Hi folk

im thinking of buying a Kramer Artist 650G as im dying for an aliminuim guitar. was looking to get a obstuctures/tacitcal works but they dont seem to be replying to my emails.

The thing im worried about with this guitar it the neck diving when i let go of it. can anyone confirm this will happen. there one on ebay with a starting bid off 699. Or do people think i mite be better off saving my cash for an EGC or a bastin?

Cheers

Johnny

Back to top

 

Disclosure: Any links to eBay or Amazon.com are affiliate links. Affiliate links may provide commission payments to the site based on purchases.


John
PostPosted: 09/23/2009 at 10:21 PM    Post subject:

Hi - you should check out www.kramerforum.com and ask your question there (don't know what the board policy is on linking to other sites but it's all about love of aluminum right? - hope the mods don't mind). I have a 450B bass that neck dives, but with a good, wide strap it's not so bad. I would think the guitars might as well but if you ask that question there you will definitely get an answer.

My guitarist has an EGC and it balances perfectly with a standard 2 inch nylon strap. He loves it and gets a great variety of sounds out of it. Though expensive it was definitely worth it. I have an EGC bass myself and it neck dives but that's because the top horn is pretty short so I need to get a wider strap to help compensate.

Good luck!

Back to top

 

Darren
PostPosted: 04/09/2010 at 04:28 AM    Post subject:

I have a 650G project with the neck and body only. I was thinking about creating a new body from a template, but I just don't have the time at the moment. Definitely needs a refret. It has been gigged heavily.

Back to top

 

MetalNecks
PostPosted: 04/28/2010 at 7:44 PM    Post subject: RE:Kramer Artist 650G

Darren.. how's that project going?

Back to top

 

Darren
PostPosted: 04/28/2010 at 7:53 PM    Post subject: RE:Kramer Artist 650G

I was planning on refretting it with stainless and having a go at it, but I ended up just selling the thing all together -- I have enough projects on the table. I decided if I start something up I want to buy an electrical guitar company 24 fret full aluminum neck and put it on a stainless steel layered body I have.

Back to top

 

Holiday Gift Ideas at GuitarCenter.com Massive Selection of Guitars Online Guitar Center


  Return to forum index




Home  |   About  |   Bastin  |  Bergeron  |  Electrical  |  Kramer  |  Obstructures  |  Travis Bean  |  Vaccaro  |  Veleno®  |   Forum  |   Contact  |   Privacy Policy
© 2022 MetalNecks.com