| Carl Walters |
 Posted: 07/30/2007 at 02:41 AM Post subject: I'd like to build a TB3000 clone |
|
|
I originally posted this on the Travis Bean Forum
http://www.travisbeanguit.....fuseaction/forum.view.htm
and they suggested that it might be worth posting here as well. So here goes!
I'd like to have a go at trying to build a TB3000 clone (having discovered that my brother-in-law just happens to have a cnc machine and lots of experience making aluminim bits and pieces for his Cobra racing car). So my plan is to get him to do the actual milling from plans I provide. Now comes the tricky part! I can find several photographs of TB300s on the web which give arough idea but I'm guessing that just a few photos wouldn't be enough to make a 3D model would it?
Does anyone have any hints they can offer please? Are plans available? Has anyone tried to do this before?
Any help and advice would be very welcome.
Carl
|
|
Back to top
|
|
|
|
Disclosure: Any links to eBay or Amazon.com are affiliate links. Affiliate links may provide commission payments to the site based on purchases.
|
|
|
| Greg Bailey |
| Posted: 08/22/2007 at 08:34 AM Post subject: The WEDGE! |
|
|
Hey Carl,
I think the figures you had on the Travis Bean were really a good start. I did some of my own figuring and even used yours some. I think this is what we both need for the Wedge body. Check it out and see what you think. Here's the link to the thread on Travis Bean.
http://www.travisbeanguit.....331c1b037779a9da7ef3b3e15
Greg
|
|
Back to top
|
|
|
|
|
|
