Rattlesnake Cable Company - High Quality Instrument Cables - Made in Montana

  EGC Flying V (Lucite) on eBay

Return to forum index

 Author  Message
MN
PostPosted: 06/24/2013 at 10:18 PM    Post subject: EGC Flying V (Lucite) on eBay

EGC Flying V (Lucite) on eBay. BIN at $3,200

"You are looking at a custom made Electrical Guitar Company Aluminum neck-through Lucite bodied Flying V! The aluminum neck extends all of the way past the bridge, for maximum sustain and tone transfer. This guitar is a show stopper, watch all of your friends foam at the mouth!

This beautiful guitar was custom built with the V hardtail specification, based on the Brent Hinds model. Kevin Burkett, the owner of Electrical Guitar Company custom programmed the layout for the string-through hardtail V variant. The knobs on this one go in a straight line from the output jack, giving this example a cleaner appearance than the Brent Hinds model. This one also has all push-pull pots, two for coil split and one for out of phase. This is also an upgrade from the Brent Hinds model. There is a Brent Hinds model currently on ebay for your perusal, but I like this one better. Also note the aircraft style pickguard screws, which are Allen head and lay flush below the pickguard surface. "

http://www.ebay.com/itm/E.....uitar&hash=item232c775467

MN

Back to top

 

Disclosure: Any links to eBay or Amazon.com are affiliate links. Affiliate links may provide commission payments to the site based on purchases.


Holiday Gift Ideas at GuitarCenter.com Massive Selection of Guitars Online Guitar Center


  Return to forum index




Home  |   About  |   Bastin  |  Bergeron  |  Electrical  |  Kramer  |  Obstructures  |  Travis Bean  |  Vaccaro  |  Veleno®  |   Forum  |   Contact  |   Privacy Policy
© 2024 MetalNecks.com